Features and benefits
- Support of CAN, CANopen, DeviceNet and SAE J1939 systems
- Physical monitoring: Monitoring of the signal-to-noise level, signal edges and display of the signal quality (0 ... 100%)
- Logical monitoring: Monitoring of active/passive error frames, overload frames, acknowledge errors
- Continuous display of bus load, bus status and optional CAN power lines
- Display of errors via LEDs (permanent or current)
- Free programmable error output lines
- Automatic e-mail transmission at detection of a failure
- Continuous display of bus load (0 ... 100%)
- Easy operation by using a web interface
- Control room connection via SNMP
- Maintenance without PC
- Export of measurement results in XML format for data processing with the CAN-Bus-Tester 2
CANobserver
The CANobserver is integrated permanently into the network, monitors the data transfer continuously and records it automatically.
Sporadic bus interferences, such as external EMC interference or a slowly deteriorating signal quality attributable to worn plug connections, can be detected in good time. To this end, the signal conditions of each CAN bus node are subjected to a physical and logical evaluation and any deviations from a predefined threshold value are recorded. In this context, the physical layer diagnosis of the CANobserver offers decisive advantages: It reveals error sources in the physical set-up of CAN, CANopen, DeviceNet and SAE J1939 systems at an early stage. Thus, CANobserver is already able to inform the system operator before any communication error occurs.
| Technical data | |
| Networks | CAN Bus (ISO 11898-2), CANopen, DeviceNet, (EN 50325-2), SAE J1939 |
| Baudrate | 5 kBit/s ... 1 MBit/s, according to the type of protocol (at CAN layer-2 additional user defined baudrates available) |
| CAN bus interface | SUB-D plug, 9-pole |
| PC/Network connection | 10/100 MBit Ethernet IEE 802.3u, RJ45 |
| Power supply | 9 - 36 V DC |
| Size and weight | 125 x 50 x 124 mm (H/W/L), about 550 g |
| Case | Aluminum case for DIN rail mounting |
| Protection level | IP 20 |
| Temperatur range | +5 °C ... +40 °C |
| Contents of delivery |
| - CANobserver |
| - Screw connector for the power supply and for the error output |
| - Quick Reference Manual |

